PDA

View Full Version : Sloppy 3\8x10 shaft revisited



TommyT
05-01-2002, 07:51 PM
A couple days ago I posted that I needed advice for tightening up the joint on a cue. I found a product at the local hardware store called Chair-Loc which swells wood fibers to repair chairs with loose parts. This stuff is the ticket! Fill the hole dump it out and in a hour the joint fits better than new. Just thought I'd pass this on.
TommyT

TonyM
05-03-2002, 12:38 AM
I was going to mention that product (I've used it myself) but I worried that it might swell the threads too agressively and possibly do some damage. If it worked great for you, then cool!

It's an interesting product.

Tony