RedHell
07-21-2004, 12:25 PM
I hope John Barton get this....
As I was surfing the net for falcon cues, I tripped upon BunjeeCanada.com web site. And I must add, the store prices are quite good.
Anyway, they have what the call Bunjee Case. I looked them up and the seem to be John's work. By readin the description, I got convince that it is John's work. Judge for yourself:
[ QUOTE ]
http://www.bunjeecanada.com/products/small/BBCC-2x4-blkstn-01.jpg Lightweight, unbreakable PVC tubing. Made especially for us, this tubing is lighter than many other casemakers tubes. Completely lined with a non-abrasive, moisture-resistant fabric. This fabric will not tear or wear away like felt does. Felt is used on the majority of todays tube cases. Also our lining will not scratch or dull the finish on your cues like some synthetic liners will. Fitted with shock-absorbing, form-fitting foam rubber. Your cues are cradled in high-grade foam rubber to protect them against impact and to insure against them accidentally falling out of the case. Moisture protection through individually sealed tubes. Sealed with high density rubber, our system of sealing each tube at the bottom keeps moisture to a minimum. This reduces the risk of warpage and deterioration of structural integrity. Fully insulated interior. This protects your cues against expansion and shrinking by allowing your cues to slowly adjust and acclimate to sudden changes in temperature. Easy opening top. One twist. One pull. One hand. No matter what others advertise, Bunjee cases are among the easiest to open and close, and the most protective opened or closed. <hr /></blockquote>
I think I've read these arguments from John over and over in different thread or newsgroup/boards.
What do you guys think, is John back in the selling cases business ?
Please John confirm that they are yours.
As I was surfing the net for falcon cues, I tripped upon BunjeeCanada.com web site. And I must add, the store prices are quite good.
Anyway, they have what the call Bunjee Case. I looked them up and the seem to be John's work. By readin the description, I got convince that it is John's work. Judge for yourself:
[ QUOTE ]
http://www.bunjeecanada.com/products/small/BBCC-2x4-blkstn-01.jpg Lightweight, unbreakable PVC tubing. Made especially for us, this tubing is lighter than many other casemakers tubes. Completely lined with a non-abrasive, moisture-resistant fabric. This fabric will not tear or wear away like felt does. Felt is used on the majority of todays tube cases. Also our lining will not scratch or dull the finish on your cues like some synthetic liners will. Fitted with shock-absorbing, form-fitting foam rubber. Your cues are cradled in high-grade foam rubber to protect them against impact and to insure against them accidentally falling out of the case. Moisture protection through individually sealed tubes. Sealed with high density rubber, our system of sealing each tube at the bottom keeps moisture to a minimum. This reduces the risk of warpage and deterioration of structural integrity. Fully insulated interior. This protects your cues against expansion and shrinking by allowing your cues to slowly adjust and acclimate to sudden changes in temperature. Easy opening top. One twist. One pull. One hand. No matter what others advertise, Bunjee cases are among the easiest to open and close, and the most protective opened or closed. <hr /></blockquote>
I think I've read these arguments from John over and over in different thread or newsgroup/boards.
What do you guys think, is John back in the selling cases business ?
Please John confirm that they are yours.