View Full Version : Squeeky joint
12-15-2004, 02:40 PM
What, if any, lubricant is recommended for joints? WD40? Thanks.
12-15-2004, 03:12 PM
you mean it squeeks when you put the cue together?
just use soap water on the joint, then dry it after a minute and it will not squeek for several months
12-15-2004, 03:18 PM
<blockquote><font class="small">Quote cnw20:</font><hr> What, if any, lubricant is recommended for joints? WD40? Thanks. <hr /></blockquote>This is going to sound gross, but one of my favorite cuemakers told me... the oils from you nose.
Anything heavier might be too heavy. I'd be interested to hear what our resident cuemakers have to say.
12-15-2004, 03:56 PM
<blockquote><font class="small">Quote Fred Agnir:</font><hr> This is going to sound gross, but one of my favorite cuemakers told me... the oils from you nose.<hr /></blockquote>Please make sure you use the oils from the outside of your nose, not the inside... /ccboard/images/graemlins/tongue.gif
12-15-2004, 06:10 PM
Use an alcholic cue tip swab to clean that joint... you will be suprised at the gunk it ferrets out! Then a little dab of liquid car wax on the male end and screw together. This should do the trick!
What Joint? I have had a squeak years ago. Tell you what I've use butter or vaseline on metals. I just lubbed a shower fixture with vaseline. Use sparingly and wipe off extra.
12-16-2004, 12:08 PM
Thanks for all the great tips - this board is great
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.