View Full Version : Re-Cushioning a Pool Table
01-04-2005, 07:07 AM
I have an antique Brunswick Makada pool table. I purchased new cushions from Mueller. The 6 cushions came as strips that need to be cut to size. Does anyone have experience doing this? I thought I could just slap them on and be done. No so! I need to cut the cushions to the proper length and angle. Length is not a problem, but angle is. It is a compound angle. Anyway, has anyone done this before and would have some advice on angles and what to cut it with?
01-04-2005, 07:30 AM
You might try posting on the rec.sport.billiard newsgroup. There seems to be lots of table mechanics there, very willing to share information. Just FYI-good luck!
01-04-2005, 07:56 AM
Cutting with a knife is not accurate if my hand is doing the cutting! I have better luck cutting it long, then using a belt sander to get the final smooth angle. May want to experiment first....
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.