View Full Version : Avantis pool table
12-13-2006, 02:16 PM
I just bought an Avantis pool table which is made by Connecticut Billiard Factory. I am picking it up on Saturday or Sunday and i am wondering if anyone has any tips on disassembling it. Thanks
12-14-2006, 06:50 PM
12-18-2006, 06:15 AM
Bruno6491. The usual dismantling starts with the pockets then the ball return,then unbolt the rails. Remove the cloth with tack puller or staple remover,unscrew the slate bolts and what ever was used for the seams,carefully remove slates and shims underneath the slates,save these you will probably need them , lean against wall,slates are easier to carry in an upright position, pocket side down. Center slate is a little harder to carry. Unscrew frame and legs, number parts and steps then reverse when putting together.
You will need a good level to put table together.Good Luck
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.