View Full Version : Jump cue butt dimensions?
09-18-2002, 09:42 PM
If you use a jump cue, could you please let me know how long the butt is and the diameter at both ends of the butt?
09-19-2002, 08:49 AM
My "Meucci Originals" JC butt is:
13 1/4" from the top of the collar to the bottom of the rubber bumper. The pin is 3/4" long and the bumper is 1/4" thick. Total length from end-of-pin to bottom-of-bumper is 14 1/4".
Collar width is approximately 7/8" and the butt width is just shy of 1 1/4".
Some other important details:
<ul type="square"> It has the original shaft and the standard length Meucci ferrule.
It has a Bungee tip (which has given it "magical powers".)
I can jump an obstructing ball from only 1/16th of an inch away, clear the ball, pocket my object ball and obtain shape on my next shot.
It can jump an obstructing ball as far away as 18 feet.
I can store my medication in the hole left by the removal of the weight bolt and keep it safe by securing the rubber bumper.
Although others say I "have issues", when I talk to my cue, it says I am "just fine."
Hope this helps. If you need more info, call me and I will let you speak directly to my cue.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.